RANSACRobustKnownBiasAndFrameGyroscopeCalibrator.java
/*
* Copyright (C) 2020 Alberto Irurueta Carro (alberto@irurueta.com)
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.irurueta.navigation.inertial.calibration.gyroscope;
import com.irurueta.algebra.Matrix;
import com.irurueta.navigation.LockedException;
import com.irurueta.navigation.NotReadyException;
import com.irurueta.navigation.inertial.calibration.CalibrationException;
import com.irurueta.navigation.inertial.calibration.StandardDeviationFrameBodyKinematics;
import com.irurueta.numerical.robust.RANSACRobustEstimator;
import com.irurueta.numerical.robust.RANSACRobustEstimatorListener;
import com.irurueta.numerical.robust.RobustEstimator;
import com.irurueta.numerical.robust.RobustEstimatorException;
import com.irurueta.numerical.robust.RobustEstimatorMethod;
import com.irurueta.units.AngularSpeed;
import java.util.List;
/**
* Robustly estimates gyroscope cross couplings and scaling factors
* along with G-dependent cross biases introduced on the gyroscope by the
* specific forces sensed by the accelerometer using a RANSAC algorithm to discard
* outliers.
* This estimator assumes that biases are known.
* <p>
* To use this calibrator at least 6 measurements at different known frames must
* be provided. In other words, accelerometer and gyroscope (i.e. body kinematics)
* samples must be obtained at 6 different positions, orientations and velocities
* (although typically velocities are always zero).
* <p>
* Measured gyroscope angular rates is assumed to follow the model shown below:
* <pre>
* Ωmeas = bg + (I + Mg) * Ωtrue + Gg * ftrue + w
* </pre>
* Where:
* - Ωmeas is the measured gyroscope angular rates. This is a 3x1 vector.
* - bg is the gyroscope bias. Ideally, on a perfect gyroscope, this should be a
* 3x1 zero vector.
* - I is the 3x3 identity matrix.
* - Mg is the 3x3 matrix containing cross-couplings and scaling factors. Ideally, on
* a perfect gyroscope, this should be a 3x3 zero matrix.
* - Ωtrue is ground-truth gyroscope angular rates.
* - Gg is the G-dependent cross biases introduced by the specific forces sensed
* by the accelerometer. Ideally, on a perfect gyroscope, this should be a 3x3
* zero matrix.
* - ftrue is ground-truth specific force. This is a 3x1 vector.
* - w is measurement noise. This is a 3x1 vector.
*/
public class RANSACRobustKnownBiasAndFrameGyroscopeCalibrator extends RobustKnownBiasAndFrameGyroscopeCalibrator {
/**
* Constant defining default threshold to determine whether samples are inliers or not.
*/
public static final double DEFAULT_THRESHOLD = 1e-2;
/**
* Minimum value that can be set as threshold.
* Threshold must be strictly greater than 0.0.
*/
public static final double MIN_THRESHOLD = 0.0;
/**
* Indicates that by default inliers will only be computed but not kept.
*/
public static final boolean DEFAULT_COMPUTE_AND_KEEP_INLIERS = false;
/**
* Indicates that by default residuals will only be computed but not kept.
*/
public static final boolean DEFAULT_COMPUTE_AND_KEEP_RESIDUALS = false;
/**
* Threshold to determine whether samples are inliers or not when testing possible solutions.
* The threshold refers to the amount of error on distance between estimated position and
* distances provided for each sample.
*/
private double threshold = DEFAULT_THRESHOLD;
/**
* Indicates whether inliers must be computed and kept.
*/
private boolean computeAndKeepInliers = DEFAULT_COMPUTE_AND_KEEP_INLIERS;
/**
* Indicates whether residuals must be computed and kept.
*/
private boolean computeAndKeepResiduals = DEFAULT_COMPUTE_AND_KEEP_RESIDUALS;
/**
* Constructor.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator() {
super();
}
/**
* Constructor.
*
* @param listener listener to be notified of events such as when estimation
* starts, ends or its progress significantly changes.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(listener);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements) {
super(measurements);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param listener listener to handle events raised by this calibrator.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(measurements, listener);
}
/**
* Constructor.
*
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(final boolean commonAxisUsed) {
super(commonAxisUsed);
}
/**
* Constructor.
*
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @param listener listener to handle events raised by this calibrator.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final boolean commonAxisUsed, final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(commonAxisUsed, listener);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements, final boolean commonAxisUsed) {
super(measurements, commonAxisUsed);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @param listener listener to handle events raised by this calibrator.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements, final boolean commonAxisUsed,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(measurements, commonAxisUsed, listener);
}
/**
* Constructor.
*
* @param biasX known x coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasY known y coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasZ known z coordinate of gyroscope bias expressed in radians per
* second (rad/s).
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final double biasX, final double biasY, final double biasZ) {
super(biasX, biasY, biasZ);
}
/**
* Constructor.
*
* @param biasX known x coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasY known y coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasZ known z coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param listener listener to be notified of events such as when estimation
* starts, ends or its progress significantly changes.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final double biasX, final double biasY, final double biasZ,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(biasX, biasY, biasZ, listener);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param biasX known x coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasY known y coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasZ known z coordinate of gyroscope bias expressed in radians per
* second (rad/s).
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements,
final double biasX, final double biasY, final double biasZ) {
super(measurements, biasX, biasY, biasZ);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param biasX known x coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasY known y coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasZ known z coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param listener listener to handle events raised by this calibrator.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements,
final double biasX, final double biasY, final double biasZ,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(measurements, biasX, biasY, biasZ, listener);
}
/**
* Constructor.
*
* @param biasX known x coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasY known y coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasZ known z coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final double biasX, final double biasY, final double biasZ, final boolean commonAxisUsed) {
super(biasX, biasY, biasZ, commonAxisUsed);
}
/**
* Constructor.
*
* @param biasX known x coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasY known y coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasZ known z coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @param listener listener to handle events raised by this calibrator.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final double biasX, final double biasY, final double biasZ, final boolean commonAxisUsed,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(biasX, biasY, biasZ, commonAxisUsed, listener);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param biasX known x coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasY known y coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasZ known z coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements,
final double biasX, final double biasY, final double biasZ, final boolean commonAxisUsed) {
super(measurements, biasX, biasY, biasZ, commonAxisUsed);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param biasX known x coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasY known y coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param biasZ known z coordinate of gyroscope bias expressed in radians per
* second (rad/s).
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @param listener listener to handle events raised by this calibrator.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements,
final double biasX, final double biasY, final double biasZ, final boolean commonAxisUsed,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(measurements, biasX, biasY, biasZ, commonAxisUsed, listener);
}
/**
* Constructor.
*
* @param biasX known x coordinate of gyroscope bias.
* @param biasY known y coordinate of gyroscope bias.
* @param biasZ known z coordinate of gyroscope bias.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final AngularSpeed biasX, final AngularSpeed biasY, final AngularSpeed biasZ) {
super(biasX, biasY, biasZ);
}
/**
* Constructor.
*
* @param biasX known x coordinate of gyroscope bias.
* @param biasY known y coordinate of gyroscope bias.
* @param biasZ known z coordinate of gyroscope bias.
* @param listener listener to be notified of events such as when estimation
* starts, ends or its progress significantly changes.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final AngularSpeed biasX, final AngularSpeed biasY, final AngularSpeed biasZ,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(biasX, biasY, biasZ, listener);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param biasX known x coordinate of gyroscope bias.
* @param biasY known y coordinate of gyroscope bias.
* @param biasZ known z coordinate of gyroscope bias.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements,
final AngularSpeed biasX, final AngularSpeed biasY, final AngularSpeed biasZ) {
super(measurements, biasX, biasY, biasZ);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param biasX known x coordinate of gyroscope bias.
* @param biasY known y coordinate of gyroscope bias.
* @param biasZ known z coordinate of gyroscope bias.
* @param listener listener to handle events raised by this calibrator.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements,
final AngularSpeed biasX, final AngularSpeed biasY, final AngularSpeed biasZ,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(measurements, biasX, biasY, biasZ, listener);
}
/**
* Constructor.
*
* @param biasX known x coordinate of gyroscope bias.
* @param biasY known y coordinate of gyroscope bias.
* @param biasZ known z coordinate of gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final AngularSpeed biasX, final AngularSpeed biasY, final AngularSpeed biasZ,
final boolean commonAxisUsed) {
super(biasX, biasY, biasZ, commonAxisUsed);
}
/**
* Constructor.
*
* @param biasX known x coordinate of gyroscope bias.
* @param biasY known y coordinate of gyroscope bias.
* @param biasZ known z coordinate of gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @param listener listener to handle events raised by this calibrator.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final AngularSpeed biasX, final AngularSpeed biasY, final AngularSpeed biasZ,
final boolean commonAxisUsed, final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(biasX, biasY, biasZ, commonAxisUsed, listener);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param biasX known x coordinate of gyroscope bias.
* @param biasY known y coordinate of gyroscope bias.
* @param biasZ known z coordinate of gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements,
final AngularSpeed biasX, final AngularSpeed biasY, final AngularSpeed biasZ,
final boolean commonAxisUsed) {
super(measurements, biasX, biasY, biasZ, commonAxisUsed);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param biasX known x coordinate of gyroscope bias.
* @param biasY known y coordinate of gyroscope bias.
* @param biasZ known z coordinate of gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @param listener listener to handle events raised by this calibrator.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements,
final AngularSpeed biasX, final AngularSpeed biasY, final AngularSpeed biasZ,
final boolean commonAxisUsed, final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(measurements, biasX, biasY, biasZ, commonAxisUsed, listener);
}
/**
* Constructor.
*
* @param bias known gyroscope bias.
* @throws IllegalArgumentException if provided array does not have length 3.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(final double[] bias) {
super(bias);
}
/**
* Constructor.
*
* @param bias known gyroscope bias.
* @param listener listener to be notified of events such as when estimation
* starts, ends or its progress significantly changes.
* @throws IllegalArgumentException if provided array does not have length 3.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final double[] bias, final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(bias, listener);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param bias known gyroscope bias.
* @throws IllegalArgumentException if provided array does not have length 3.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements, final double[] bias) {
super(measurements, bias);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param bias known gyroscope bias.
* @param listener listener to handle events raised by this calibrator.
* @throws IllegalArgumentException if provided array does not have length 3.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements, final double[] bias,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(measurements, bias, listener);
}
/**
* Constructor.
*
* @param bias known gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @throws IllegalArgumentException if provided array does not have length 3.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(final double[] bias, final boolean commonAxisUsed) {
super(bias, commonAxisUsed);
}
/**
* Constructor.
*
* @param bias known gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @param listener listener to handle events raised by this calibrator.
* @throws IllegalArgumentException if provided array does not have length 3.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final double[] bias, final boolean commonAxisUsed,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(bias, commonAxisUsed, listener);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param bias known gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @throws IllegalArgumentException if provided array does not have length 3.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements, final double[] bias,
final boolean commonAxisUsed) {
super(measurements, bias, commonAxisUsed);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param bias known gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @param listener listener to handle events raised by this calibrator.
* @throws IllegalArgumentException if provided array does not have length 3.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements, final double[] bias,
final boolean commonAxisUsed, final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(measurements, bias, commonAxisUsed, listener);
}
/**
* Constructor.
*
* @param bias known gyroscope bias.
* @throws IllegalArgumentException if provided matrix is not 3x1.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(final Matrix bias) {
super(bias);
}
/**
* Constructor.
*
* @param bias known gyroscope bias.
* @param listener listener to be notified of events such as when estimation
* starts, ends or its progress significantly changes.
* @throws IllegalArgumentException if provided matrix is not 3x1.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final Matrix bias, final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(bias, listener);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param bias known gyroscope bias.
* @throws IllegalArgumentException if provided matrix is not 3x1.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements, final Matrix bias) {
super(measurements, bias);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param bias known gyroscope bias.
* @param listener listener to handle events raised by this calibrator.
* @throws IllegalArgumentException if provided matrix is not 3x1.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements, final Matrix bias,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(measurements, bias, listener);
}
/**
* Constructor.
*
* @param bias known gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @throws IllegalArgumentException if provided matrix is not 3x1.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(final Matrix bias, final boolean commonAxisUsed) {
super(bias, commonAxisUsed);
}
/**
* Constructor.
*
* @param bias known gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @param listener listener to handle events raised by this calibrator.
* @throws IllegalArgumentException if provided matrix is not 3x1.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final Matrix bias, final boolean commonAxisUsed,
final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(bias, commonAxisUsed, listener);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param bias known gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @throws IllegalArgumentException if provided matrix is not 3x1.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements, final Matrix bias,
final boolean commonAxisUsed) {
super(measurements, bias, commonAxisUsed);
}
/**
* Constructor.
*
* @param measurements list of body kinematics measurements with standard
* deviations taken at different frames (positions, orientations
* and velocities).
* @param bias known gyroscope bias.
* @param commonAxisUsed indicates whether z-axis is assumed to be common for
* accelerometer and gyroscope.
* @param listener listener to handle events raised by this calibrator.
* @throws IllegalArgumentException if provided matrix is not 3x1.
*/
public RANSACRobustKnownBiasAndFrameGyroscopeCalibrator(
final List<StandardDeviationFrameBodyKinematics> measurements, final Matrix bias,
final boolean commonAxisUsed, final RobustKnownBiasAndFrameGyroscopeCalibratorListener listener) {
super(measurements, bias, commonAxisUsed, listener);
}
/**
* Gets threshold to determine whether samples are inliers or not when testing possible solutions.
* The threshold refers to the amount of error on norm between measured angular rates and the
* ones generated with estimated calibration parameters provided for each sample.
*
* @return threshold to determine whether samples are inliers or not.
*/
public double getThreshold() {
return threshold;
}
/**
* Sets threshold to determine whether samples are inliers or not when testing possible solutions.
* The threshold refers to the amount of error on norm between measured angular rates and the
* ones generated with estimated calibration parameters provided for each sample.
*
* @param threshold threshold to determine whether samples are inliers or not.
* @throws IllegalArgumentException if provided value is equal or less than zero.
* @throws LockedException if calibrator is currently running.
*/
public void setThreshold(final double threshold) throws LockedException {
if (running) {
throw new LockedException();
}
if (threshold <= MIN_THRESHOLD) {
throw new IllegalArgumentException();
}
this.threshold = threshold;
}
/**
* Indicates whether inliers must be computed and kept.
*
* @return true if inliers must be computed and kept, false if inliers
* only need to be computed but not kept.
*/
public boolean isComputeAndKeepInliersEnabled() {
return computeAndKeepInliers;
}
/**
* Specifies whether inliers must be computed and kept.
*
* @param computeAndKeepInliers true if inliers must be computed and kept,
* false if inliers only need to be computed but not kept.
* @throws LockedException if calibrator is currently running.
*/
public void setComputeAndKeepInliersEnabled(final boolean computeAndKeepInliers) throws LockedException {
if (running) {
throw new LockedException();
}
this.computeAndKeepInliers = computeAndKeepInliers;
}
/**
* Indicates whether residuals must be computed and kept.
*
* @return true if residuals must be computed and kept, false if residuals
* only need to be computed but not kept.
*/
public boolean isComputeAndKeepResiduals() {
return computeAndKeepResiduals;
}
/**
* Specifies whether residuals must be computed and kept.
*
* @param computeAndKeepResiduals true if residuals must be computed and kept,
* false if residuals only need to be computed but not kept.
* @throws LockedException if calibrator is currently running.
*/
public void setComputeAndKeepResidualsEnabled(final boolean computeAndKeepResiduals) throws LockedException {
if (running) {
throw new LockedException();
}
this.computeAndKeepResiduals = computeAndKeepResiduals;
}
/**
* Estimates gyroscope calibration parameters containing bias, scale factors
* cross-coupling errors and g-dependant cross biases.
*
* @throws LockedException if calibrator is currently running.
* @throws NotReadyException if calibrator is not ready.
* @throws CalibrationException if estimation fails for numerical reasons.
*/
@SuppressWarnings("DuplicatedCode")
@Override
public void calibrate() throws LockedException, NotReadyException, CalibrationException {
if (running) {
throw new LockedException();
}
if (!isReady()) {
throw new NotReadyException();
}
final var innerEstimator = new RANSACRobustEstimator<>(new RANSACRobustEstimatorListener<PreliminaryResult>() {
@Override
public double getThreshold() {
return threshold;
}
@Override
public int getTotalSamples() {
return measurements.size();
}
@Override
public int getSubsetSize() {
return preliminarySubsetSize;
}
@Override
public void estimatePreliminarSolutions(
final int[] samplesIndices, final List<PreliminaryResult> solutions) {
computePreliminarySolutions(samplesIndices, solutions);
}
@Override
public double computeResidual(final PreliminaryResult currentEstimation, final int i) {
return computeError(measurements.get(i), currentEstimation);
}
@Override
public boolean isReady() {
return RANSACRobustKnownBiasAndFrameGyroscopeCalibrator.super.isReady();
}
@Override
public void onEstimateStart(final RobustEstimator<PreliminaryResult> estimator) {
// no action needed
}
@Override
public void onEstimateEnd(final RobustEstimator<PreliminaryResult> estimator) {
// no action needed
}
@Override
public void onEstimateNextIteration(
final RobustEstimator<PreliminaryResult> estimator, final int iteration) {
if (listener != null) {
listener.onCalibrateNextIteration(
RANSACRobustKnownBiasAndFrameGyroscopeCalibrator.this, iteration);
}
}
@Override
public void onEstimateProgressChange(
final RobustEstimator<PreliminaryResult> estimator, final float progress) {
if (listener != null) {
listener.onCalibrateProgressChange(
RANSACRobustKnownBiasAndFrameGyroscopeCalibrator.this, progress);
}
}
});
try {
running = true;
if (listener != null) {
listener.onCalibrateStart(this);
}
inliersData = null;
innerEstimator.setComputeAndKeepInliersEnabled(computeAndKeepInliers || refineResult);
innerEstimator.setComputeAndKeepResidualsEnabled(computeAndKeepResiduals || refineResult);
innerEstimator.setConfidence(confidence);
innerEstimator.setMaxIterations(maxIterations);
innerEstimator.setProgressDelta(progressDelta);
final var preliminaryResult = innerEstimator.estimate();
inliersData = innerEstimator.getInliersData();
attemptRefine(preliminaryResult);
if (listener != null) {
listener.onCalibrateEnd(this);
}
} catch (final com.irurueta.numerical.LockedException e) {
throw new LockedException(e);
} catch (final com.irurueta.numerical.NotReadyException e) {
throw new NotReadyException(e);
} catch (final RobustEstimatorException e) {
throw new CalibrationException(e);
} finally {
running = false;
}
}
/**
* Returns method being used for robust estimation.
*
* @return method being used for robust estimation.
*/
@Override
public RobustEstimatorMethod getMethod() {
return RobustEstimatorMethod.RANSAC;
}
/**
* Indicates whether this calibrator requires quality scores for each
* measurement/sequence or not.
*
* @return true if quality scores are required, false otherwise.
*/
@Override
public boolean isQualityScoresRequired() {
return false;
}
}