Class RANSACRobustRangingAndRssiRadioSourceEstimator2D<S extends RadioSource>
java.lang.Object
com.irurueta.navigation.indoor.radiosource.RobustRadioSourceEstimator<com.irurueta.geometry.Point2D,RangingAndRssiReadingLocated<S,com.irurueta.geometry.Point2D>,RobustRangingAndRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D>>
com.irurueta.navigation.indoor.radiosource.RobustRangingAndRssiRadioSourceEstimator<S,com.irurueta.geometry.Point2D>
com.irurueta.navigation.indoor.radiosource.RobustRangingAndRssiRadioSourceEstimator2D<S>
com.irurueta.navigation.indoor.radiosource.RANSACRobustRangingAndRssiRadioSourceEstimator2D<S>
- Type Parameters:
S- aRadioSourcetype.
public class RANSACRobustRangingAndRssiRadioSourceEstimator2D<S extends RadioSource>
extends RobustRangingAndRssiRadioSourceEstimator2D<S>
Robustly estimate 2D position, transmitted power and path-loss
exponent of a radio source (e.g. Wi-Fi access point or bluetooth beacon), by discarding
outliers using PROSAC algorithm and assuming that the ranging data is available to
obtain position with greater accuracy and that the radio source emits isotropically
following the expression below:
Pr = Pt*Gt*Gr*lambda^2 / (4*pi*d)^2,
where Pr is the received power (expressed in mW),
Gt is the Gain of the transmission antenna
Gr is the Gain of the receiver antenna
d is the distance between emitter and receiver
and lambda is the wavelength and is equal to: lambda = c / f,
where c is the speed of light
and f is the carrier frequency of the radio signal.
Because usually information about the antenna of the radio source cannot be
retrieved (because many measurements are made on unknown devices where
physical access is not possible), this implementation will estimate the
equivalent transmitted power as: Pte = Pt * Gt * Gr.
If Readings contain RSSI standard deviations, those values will be used,
otherwise it will be assumed an RSSI standard deviation of 1 dB.
-
Nested Class Summary
Nested classes/interfaces inherited from class com.irurueta.navigation.indoor.radiosource.RobustRangingAndRssiRadioSourceEstimator
RobustRangingAndRssiRadioSourceEstimator.Solution<P extends com.irurueta.geometry.Point<?>> -
Field Summary
FieldsModifier and TypeFieldDescriptionprivate booleanIndicates whether inliers must be computed and kept.private booleanIndicates whether residuals must be computed and kept.static final booleanIndicates that by default inliers will only be computed but not kept.static final booleanIndicates that by default residuals will only be computed but not kept.static final doubleConstant defining default threshold on received power (RSSI) expressed in dBm's.static final doubleMinimum value that can be set as threshold.private doubleThreshold to determine whether samples are inliers or not when testing possible solutions.Fields inherited from class com.irurueta.navigation.indoor.radiosource.RobustRangingAndRssiRadioSourceEstimator2D
innerEstimatorFields inherited from class com.irurueta.navigation.indoor.radiosource.RobustRangingAndRssiRadioSourceEstimator
DEFAULT_USE_READING_POSITION_COVARIANCES, estimatedPathLossExponent, estimatedPathLossExponentVariance, estimatedTransmittedPowerdBm, estimatedTransmittedPowerVariance, initialPathLossExponent, initialPosition, initialTransmittedPowerdBm, pathLossEstimationEnabled, transmittedPowerEstimationEnabled, useReadingPositionCovariancesFields inherited from class com.irurueta.navigation.indoor.radiosource.RobustRadioSourceEstimator
confidence, covariance, DEFAULT_CONFIDENCE, DEFAULT_KEEP_COVARIANCE, DEFAULT_MAX_ITERATIONS, DEFAULT_PROGRESS_DELTA, DEFAULT_REFINE_RESULT, DEFAULT_ROBUST_METHOD, estimatedPosition, estimatedPositionCovariance, inliersData, keepCovariance, listener, locked, MAX_CONFIDENCE, MAX_PROGRESS_DELTA, maxIterations, MIN_CONFIDENCE, MIN_ITERATIONS, MIN_PROGRESS_DELTA, preliminarySubsetSize, progressDelta, readings, refineResult -
Constructor Summary
ConstructorsConstructorDescriptionConstructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, RobustRangingAndRssiRadioSourceEstimatorListener<S, com.irurueta.geometry.Point2D> listener) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRangingAndRssiRadioSourceEstimatorListener<S, com.irurueta.geometry.Point2D> listener) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRangingAndRssiRadioSourceEstimatorListener<S, com.irurueta.geometry.Point2D> listener) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(RobustRangingAndRssiRadioSourceEstimatorListener<S, com.irurueta.geometry.Point2D> listener) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(Double initialTransmittedPowerdBm) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(Double initialTransmittedPowerdBm, RobustRangingAndRssiRadioSourceEstimatorListener<S, com.irurueta.geometry.Point2D> listener) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, RobustRangingAndRssiRadioSourceEstimatorListener<S, com.irurueta.geometry.Point2D> listener) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRangingAndRssiRadioSourceEstimatorListener<S, com.irurueta.geometry.Point2D> listener) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRangingAndRssiRadioSourceEstimatorListener<S, com.irurueta.geometry.Point2D> listener) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, RobustRangingAndRssiRadioSourceEstimatorListener<S, com.irurueta.geometry.Point2D> listener) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm) Constructor.RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm, RobustRangingAndRssiRadioSourceEstimatorListener<S, com.irurueta.geometry.Point2D> listener) Constructor. -
Method Summary
Modifier and TypeMethodDescriptionvoidestimate()Robustly estimates position, transmitted power and path-loss exponent for a radio source.com.irurueta.numerical.robust.RobustEstimatorMethodReturns method being used for robust estimation.doubleGets threshold to determine whether samples are inliers or not when testing possible solutions.booleanIndicates whether inliers must be computed and kept.booleanIndicates whether residuals must be computed and kept.voidsetComputeAndKeepInliersEnabled(boolean computeAndKeepInliers) Specifies whether inliers must be computed and kept.voidsetComputeAndKeepResidualsEnabled(boolean computeAndKeepResiduals) Specifies whether residuals must be computed and kept.voidsetThreshold(double threshold) Sets threshold to determine whether samples are inliers or not when testing possible solutions.Methods inherited from class com.irurueta.navigation.indoor.radiosource.RobustRangingAndRssiRadioSourceEstimator2D
attemptRefine, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, create, getEstimatedRadioSource, getMinReadings, getNumberOfDimensions, isHomogeneousRangingLinearSolverUsed, setHomogeneousRangingLinearSolverUsed, solvePreliminarySolutionsMethods inherited from class com.irurueta.navigation.indoor.radiosource.RobustRangingAndRssiRadioSourceEstimator
getEstimatedPathLossExponent, getEstimatedPathLossExponentVariance, getEstimatedTransmittedPower, getEstimatedTransmittedPowerdBm, getEstimatedTransmittedPowerVariance, getInitialPathLossExponent, getInitialPosition, getInitialTransmittedPower, getInitialTransmittedPowerdBm, getUseReadingPositionCovariance, isPathLossEstimationEnabled, isReady, isTransmittedPowerEstimationEnabled, residual, setInitialPathLossExponent, setInitialPosition, setInitialTransmittedPower, setInitialTransmittedPowerdBm, setPathLossEstimationEnabled, setTransmittedPowerEstimationEnabled, setUseReadingPositionCovariancesMethods inherited from class com.irurueta.navigation.indoor.radiosource.RobustRadioSourceEstimator
areValidReadings, getConfidence, getCovariance, getEstimatedPosition, getEstimatedPositionCovariance, getInliersData, getListener, getMaxIterations, getPreliminarySubsetSize, getProgressDelta, getQualityScores, getReadings, internalSetReadings, isCovarianceKept, isLocked, isResultRefined, setConfidence, setCovarianceKept, setListener, setMaxIterations, setPreliminarySubsetSize, setProgressDelta, setQualityScores, setReadings, setResultRefined
-
Field Details
-
DEFAULT_THRESHOLD
public static final double DEFAULT_THRESHOLDConstant defining default threshold on received power (RSSI) expressed in dBm's.- See Also:
-
MIN_THRESHOLD
public static final double MIN_THRESHOLDMinimum value that can be set as threshold. Threshold must be strictly greater than 0.0.s- See Also:
-
DEFAULT_COMPUTE_AND_KEEP_INLIERS
public static final boolean DEFAULT_COMPUTE_AND_KEEP_INLIERSIndicates that by default inliers will only be computed but not kept.- See Also:
-
DEFAULT_COMPUTE_AND_KEEP_RESIDUALS
public static final boolean DEFAULT_COMPUTE_AND_KEEP_RESIDUALSIndicates that by default residuals will only be computed but not kept.- See Also:
-
threshold
private double thresholdThreshold to determine whether samples are inliers or not when testing possible solutions. The threshold refers to the amount of error on received power (RSSI) expressed in dBm's between received value that should have been received on estimated iso-tropical model and actual measured value. -
computeAndKeepInliers
private boolean computeAndKeepInliersIndicates whether inliers must be computed and kept. -
computeAndKeepResiduals
private boolean computeAndKeepResidualsIndicates whether residuals must be computed and kept.
-
-
Constructor Details
-
RANSACRobustRangingAndRssiRadioSourceEstimator2D
public RANSACRobustRangingAndRssiRadioSourceEstimator2D()Constructor. -
RANSACRobustRangingAndRssiRadioSourceEstimator2D
public RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings) Constructor. Sets signal readings belonging to the same radio source.- Parameters:
readings- signal readings belonging to the same radio source.- Throws:
IllegalArgumentException- if readings are not valid.
-
RANSACRobustRangingAndRssiRadioSourceEstimator2D
public RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition) Constructor. Sets signal readings belonging to the same radio source.- Parameters:
readings- signal readings belonging to the same radio source.initialPosition- initial position to start the estimation of radio source position.- Throws:
IllegalArgumentException- if readings are not valid.
-
RANSACRobustRangingAndRssiRadioSourceEstimator2D
public RANSACRobustRangingAndRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition) Constructor.- Parameters:
initialPosition- initial position to start the estimation of radio source position.
-
RANSACRobustRangingAndRssiRadioSourceEstimator2D
Constructor.- Parameters:
initialTransmittedPowerdBm- initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)
-
RANSACRobustRangingAndRssiRadioSourceEstimator2D
public RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm) Constructor. Sets signal readings belonging to the same radio source.- Parameters:
readings- signal readings belonging to the same radio source.initialTransmittedPowerdBm- initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)- Throws:
IllegalArgumentException- if readings are not valid.
-
RANSACRobustRangingAndRssiRadioSourceEstimator2D
public RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm) Constructor. Sets signal readings belonging to the same radio source.- Parameters:
readings- signal readings belonging to the same radio source.initialPosition- initial position to start the estimation of radio source position.initialTransmittedPowerdBm- initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).- Throws:
IllegalArgumentException- if readings are not valid.
-
RANSACRobustRangingAndRssiRadioSourceEstimator2D
public RANSACRobustRangingAndRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm) Constructor.- Parameters:
initialPosition- initial position to start the estimation of radio source position.initialTransmittedPowerdBm- initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).
-
RANSACRobustRangingAndRssiRadioSourceEstimator2D
public RANSACRobustRangingAndRssiRadioSourceEstimator2D(List<? extends RangingAndRssiReadingLocated<S, com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent) Constructor. Sets signal readings belonging to the same radio source.- Parameters:
readings- signal readings belonging to the same radio source.initialPosition- initial position to start the estimation of radio source position.initialTransmittedPowerdBm- initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).initialPathLossExponent- initial path loss exponent. A typical value is 2.0.- Throws:
IllegalArgumentException- if readings are not valid.
-
RANSACRobustRangingAndRssiRadioSourceEstimator2D
public RANSACRobustRangingAndRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent) Constructor.- Parameters:
initialPosition- initial position to start the estimation of radio source position.initialTransmittedPowerdBm- initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).initialPathLossExponent- initial path loss exponent. A typical value is 2.0.
-
-
Method Details
-
getThreshold
public double getThreshold()Gets threshold to determine whether samples are inliers or not when testing possible solutions. The threshold refers to the amount of error on received power (RSSI) expressed in dBm's between received value that should have been received on estimated iso-tropical model and actual measured value.- Returns:
- threshold to determine whether samples are inliers or not.
-
setThreshold
public void setThreshold(double threshold) throws com.irurueta.navigation.LockedException Sets threshold to determine whether samples are inliers or not when testing possible solutions. The threshold refers to the amount of error on received power (RSSI) expressed in dBm's between received value that should have been received on estimated iso-tropical model and actual measured value.- Parameters:
threshold- threshold to determine whether samples are inliers or not.- Throws:
IllegalArgumentException- if provided value is equal or less than zero.com.irurueta.navigation.LockedException- if this estimator is locked.
-
isComputeAndKeepInliersEnabled
public boolean isComputeAndKeepInliersEnabled()Indicates whether inliers must be computed and kept.- Returns:
- true if inliers must be computed and kept, false if inliers only need to be computed but not kept.
-
setComputeAndKeepInliersEnabled
public void setComputeAndKeepInliersEnabled(boolean computeAndKeepInliers) throws com.irurueta.navigation.LockedException Specifies whether inliers must be computed and kept.- Parameters:
computeAndKeepInliers- true if inliers must be computed and kept, false if inliers only need to be computed but not kept.- Throws:
com.irurueta.navigation.LockedException- if this solver is locked.
-
isComputeAndKeepResidualsEnabled
public boolean isComputeAndKeepResidualsEnabled()Indicates whether residuals must be computed and kept.- Returns:
- true if residuals must be computed and kept, false if residuals only need to be computed but not kept.
-
setComputeAndKeepResidualsEnabled
public void setComputeAndKeepResidualsEnabled(boolean computeAndKeepResiduals) throws com.irurueta.navigation.LockedException Specifies whether residuals must be computed and kept.- Parameters:
computeAndKeepResiduals- true if residuals must be computed and kept, false if residuals only need to be computed but not kept.- Throws:
com.irurueta.navigation.LockedException- if this solver is locked.
-
estimate
public void estimate() throws com.irurueta.navigation.LockedException, com.irurueta.navigation.NotReadyException, com.irurueta.numerical.robust.RobustEstimatorExceptionRobustly estimates position, transmitted power and path-loss exponent for a radio source.- Specified by:
estimatein classRobustRadioSourceEstimator<com.irurueta.geometry.Point2D,RangingAndRssiReadingLocated<S extends RadioSource, com.irurueta.geometry.Point2D>, RobustRangingAndRssiRadioSourceEstimatorListener<S extends RadioSource, com.irurueta.geometry.Point2D>> - Throws:
com.irurueta.navigation.LockedException- if instance is busy during estimation.com.irurueta.navigation.NotReadyException- if estimator is not ready.com.irurueta.numerical.robust.RobustEstimatorException- if estimation fails for any reason (i.e. numerical instability, no solution available, etc).
-
getMethod
public com.irurueta.numerical.robust.RobustEstimatorMethod getMethod()Returns method being used for robust estimation.- Specified by:
getMethodin classRobustRangingAndRssiRadioSourceEstimator<S extends RadioSource,com.irurueta.geometry.Point2D> - Returns:
- method being used for robust estimation.
-