Package com.irurueta.navigation.inertial.calibration.accelerometer

Class PROSACRobustKnownPositionAccelerometerCalibrator

java.lang.Object
com.irurueta.navigation.inertial.calibration.accelerometer.RobustKnownPositionAccelerometerCalibrator
com.irurueta.navigation.inertial.calibration.accelerometer.PROSACRobustKnownPositionAccelerometerCalibrator
All Implemented Interfaces:
AccelerometerCalibrator, AccelerometerNonLinearCalibrator, OrderedStandardDeviationBodyKinematicsAccelerometerCalibrator, QualityScoredAccelerometerCalibrator, UnknownBiasAccelerometerCalibrator, UnknownBiasNonLinearAccelerometerCalibrator, AccelerometerBiasUncertaintySource, AccelerometerCalibrationSource
public class PROSACRobustKnownPositionAccelerometerCalibrator extends RobustKnownPositionAccelerometerCalibrator
Robustly estimates accelerometer biases, cross couplings and scaling factors using a PROSAC algorithm to discard outliers.

To use this calibrator at least 10 measurements taken at a single known position must be taken at 10 different unknown orientations and zero velocity when common z-axis is assumed, otherwise at least 13 measurements are required.

Measured specific force is assumed to follow the model shown below: 

     fmeas = ba + (I + Ma) * ftrue + w
Where: - fmeas is the measured specific force. This is a 3x1 vector. - ba is accelerometer bias. Ideally, on a perfect accelerometer, this should be a 3x1 zero vector. - I is the 3x3 identity matrix. - Ma is the 3x3 matrix containing cross-couplings and scaling factors. Ideally, on a perfect accelerometer, this should be a 3x3 zero matrix. - ftrue is ground-truth specific force. - w is measurement noise.

  • Field Details

    • DEFAULT_THRESHOLD

      public static final double DEFAULT_THRESHOLD
      Constant defining default threshold to determine whether samples are inliers or not.
      See Also:

    • MIN_THRESHOLD

      public static final double MIN_THRESHOLD
      Minimum value that can be set as threshold. Threshold must be strictly greater than 0.0.
      See Also:

    • DEFAULT_COMPUTE_AND_KEEP_INLIERS

      public static final boolean DEFAULT_COMPUTE_AND_KEEP_INLIERS
      Indicates that by default inliers will only be computed but not kept.
      See Also:

    • DEFAULT_COMPUTE_AND_KEEP_RESIDUALS

      public static final boolean DEFAULT_COMPUTE_AND_KEEP_RESIDUALS
      Indicates that by default residuals will only be computed but not kept.
      See Also:

    • threshold

      private double threshold
      Threshold to determine whether samples are inliers or not when testing possible solutions. The threshold refers to the amount of error on distance between estimated position and distances provided for each sample.

    • computeAndKeepInliers

      private boolean computeAndKeepInliers
      Indicates whether inliers must be computed and kept.

    • computeAndKeepResiduals

      private boolean computeAndKeepResiduals
      Indicates whether residuals must be computed and kept.

    • qualityScores

      private double[] qualityScores
      Quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

  • Constructor Details

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator()
      Constructor.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      listener - listener to be notified of events such as when estimation starts, ends or its progress significantly changes.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(List<StandardDeviationBodyKinematics> measurements)
      Constructor.
      Parameters:
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(boolean commonAxisUsed)
      Constructor.
      Parameters:
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] initialBias)
      Constructor.
      Parameters:
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.algebra.Matrix initialBias)
      Constructor.
      Parameters:
      initialBias - initial bias to find a solution.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa)
      Constructor.
      Parameters:
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      listener - listener to be notified of events such as when estimation starts, ends or its progress significantly changes.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      listener - listener to be notified of events such as when estimation starts, ends or its progress significantly changes.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, double[] initialBias)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, double[] initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, double[] initialBias)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, double[] initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      listener - listener to be notified of events such as when estimation starts, ends or its progress significantly changes.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      listener - listener to be notified of events such as when estimation starts, ends or its progress significantly changes.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, double[] initialBias)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, double[] initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, double[] initialBias)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, double[] initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      listener - listener to handle events raised by this calibrator.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      Throws:
      IllegalArgumentException - if provided quality scores length is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      listener - listener to be notified of events such as when estimation starts, ends or its progress significantly changes.
      Throws:
      IllegalArgumentException - if provided quality scores length is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope. If true 10 samples are required, otherwise 13.
      Throws:
      IllegalArgumentException - if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope. If true 10 samples are required, otherwise 13.
      listener - listener to be notified of events such as when estimation starts, ends or its progress significantly changes.
      Throws:
      IllegalArgumentException - if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, double[] initialBias)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3 or quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, double[] initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3 or if quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, double[] initialBias)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, double[] initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1 or if quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1 or if quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3 or if quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3 or if quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.ECEFPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      Throws:
      IllegalArgumentException - if provided quality scores length is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      listener - listener to be notified of events such as when estimation starts, ends or its progress significantly changes.
      Throws:
      IllegalArgumentException - if provided quality scores length is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope. If true 10 samples are required, otherwise 13.
      Throws:
      IllegalArgumentException - if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - list of body kinematics measurements taken at a given position with different unknown orientations and containing the standard deviations of accelerometer and gyroscope measurements.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope. If true 10 samples are required, otherwise 13.
      listener - listener to be notified of events such as when estimation starts, ends or its progress significantly changes.
      Throws:
      IllegalArgumentException - if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, double[] initialBias)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3 or quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, double[] initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3 or if quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, double[] initialBias)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, double[] initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial accelerometer bias to be used to find a solution. This must have length 3 and is expressed in meters per squared second (m/s^2).
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias array does not have length 3 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1 or if quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1 or if quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if provided bias matrix is not 3x1 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3 or if quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3 or if quality scores array is smaller than 13 samples.

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

    • PROSACRobustKnownPositionAccelerometerCalibrator

      public PROSACRobustKnownPositionAccelerometerCalibrator(double[] qualityScores, com.irurueta.navigation.frames.NEDPosition position, List<StandardDeviationBodyKinematics> measurements, boolean commonAxisUsed, com.irurueta.algebra.Matrix initialBias, com.irurueta.algebra.Matrix initialMa, RobustKnownPositionAccelerometerCalibratorListener listener)
      Constructor.
      Parameters:
      qualityScores - quality scores corresponding to each provided measurement. The larger the score value the better the quality of the sample.
      position - position where body kinematics measures have been taken.
      measurements - collection of body kinematics measurements with standard deviations taken at the same position with zero velocity and unknown different orientations.
      commonAxisUsed - indicates whether z-axis is assumed to be common for accelerometer and gyroscope.
      initialBias - initial bias to find a solution.
      initialMa - initial scale factors and cross coupling errors matrix.
      listener - listener to handle events raised by this calibrator.
      Throws:
      IllegalArgumentException - if either provided bias matrix is not 3x1 or scaling and coupling error matrix is not 3x3 or if provided quality scores length is smaller than the minimum number of required samples (10 or 13).

  • Method Details

    • getThreshold

      public double getThreshold()
      Gets threshold to determine whether samples are inliers or not when testing possible solutions. The threshold refers to the amount of error on norm between measured specific forces and the ones generated with estimated calibration parameters provided for each sample.
      Returns:
      threshold to determine whether samples are inliers or not.

    • setThreshold

      public void setThreshold(double threshold) throws com.irurueta.navigation.LockedException
      Sets threshold to determine whether samples are inliers or not when testing possible solutions. The threshold refers to the amount of error on norm between measured specific forces and the ones generated with estimated calibration parameters provided for each sample.
      Parameters:
      threshold - threshold to determine whether samples are inliers or not.
      Throws:
      IllegalArgumentException - if provided value is equal or less than zero.
      com.irurueta.navigation.LockedException - if calibrator is currently running.

    • getQualityScores

      public double[] getQualityScores()
      Returns quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.
      Specified by:
      getQualityScores in interface QualityScoredAccelerometerCalibrator
      Overrides:
      getQualityScores in class RobustKnownPositionAccelerometerCalibrator
      Returns:
      quality scores corresponding to each sample.

    • setQualityScores

      public void setQualityScores(double[] qualityScores) throws com.irurueta.navigation.LockedException
      Sets quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.
      Specified by:
      setQualityScores in interface QualityScoredAccelerometerCalibrator
      Overrides:
      setQualityScores in class RobustKnownPositionAccelerometerCalibrator
      Parameters:
      qualityScores - quality scores corresponding to each sample.
      Throws:
      IllegalArgumentException - if provided quality scores length is smaller than minimum required samples (10 or 13).
      com.irurueta.navigation.LockedException - if calibrator is currently running.

    • isReady

      public boolean isReady()
      Indicates whether calibrator is ready to find a solution.
      Specified by:
      isReady in interface AccelerometerCalibrator
      Overrides:
      isReady in class RobustKnownPositionAccelerometerCalibrator
      Returns:
      true if calibrator is ready, false otherwise.

    • isComputeAndKeepInliersEnabled

      public boolean isComputeAndKeepInliersEnabled()
      Indicates whether inliers must be computed and kept.
      Returns:
      true if inliers must be computed and kept, false if inliers only need to be computed but not kept.

    • setComputeAndKeepInliersEnabled

      public void setComputeAndKeepInliersEnabled(boolean computeAndKeepInliers) throws com.irurueta.navigation.LockedException
      Specifies whether inliers must be computed and kept.
      Parameters:
      computeAndKeepInliers - true if inliers must be computed and kept, false if inliers only need to be computed but not kept.
      Throws:
      com.irurueta.navigation.LockedException - if calibrator is currently running.

    • isComputeAndKeepResiduals

      public boolean isComputeAndKeepResiduals()
      Indicates whether residuals must be computed and kept.
      Returns:
      true if residuals must be computed and kept, false if residuals only need to be computed but not kept.

    • setComputeAndKeepResidualsEnabled

      public void setComputeAndKeepResidualsEnabled(boolean computeAndKeepResiduals) throws com.irurueta.navigation.LockedException
      Specifies whether residuals must be computed and kept.
      Parameters:
      computeAndKeepResiduals - true if residuals must be computed and kept, false if residuals only need to be computed but not kept.
      Throws:
      com.irurueta.navigation.LockedException - if calibrator is currently running.

    • calibrate

      public void calibrate() throws com.irurueta.navigation.LockedException, com.irurueta.navigation.NotReadyException, CalibrationException
      Estimates accelerometer calibration parameters containing bias, scale factors and cross-coupling errors.
      Throws:
      com.irurueta.navigation.LockedException - if calibrator is currently running.
      com.irurueta.navigation.NotReadyException - if calibrator is not ready.
      CalibrationException - if estimation fails for numerical reasons.

    • getMethod

      public com.irurueta.numerical.robust.RobustEstimatorMethod getMethod()
      Returns method being used for robust estimation.
      Specified by:
      getMethod in class RobustKnownPositionAccelerometerCalibrator
      Returns:
      method being used for robust estimation.

    • isQualityScoresRequired

      public boolean isQualityScoresRequired()
      Indicates whether this calibrator requires quality scores for each measurement or not.
      Returns:
      true if quality scores are required, false otherwise.

    • internalSetQualityScores

      private void internalSetQualityScores(double[] qualityScores)
      Sets quality scores corresponding to each provided sample. This method is used internally and does not check whether instance is locked or not.
      Parameters:
      qualityScores - quality scores to be set.
      Throws:
      IllegalArgumentException - if provided quality scores length is smaller than the minimum required number of samples (10 or 13).