Package com.irurueta.navigation.indoor.radiosource

Class RobustRssiRadioSourceEstimator2D<S extends RadioSource>

java.lang.Object

com.irurueta.navigation.indoor.radiosource.RobustRadioSourceEstimator<com.irurueta.geometry.Point2D,RssiReadingLocated<S,com.irurueta.geometry.Point2D>,RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D>>

com.irurueta.navigation.indoor.radiosource.RobustRssiRadioSourceEstimator<S,com.irurueta.geometry.Point2D>

com.irurueta.navigation.indoor.radiosource.RobustRssiRadioSourceEstimator2D<S>

Type Parameters:

S - a RadioSource type.

Direct Known Subclasses:

LMedSRobustRssiRadioSourceEstimator2D, MSACRobustRssiRadioSourceEstimator2D, PROMedSRobustRssiRadioSourceEstimator2D, PROSACRobustRssiRadioSourceEstimator2D, RANSACRobustRssiRadioSourceEstimator2D

public abstract class RobustRssiRadioSourceEstimator2D<S extends RadioSource>
extends RobustRssiRadioSourceEstimator<S,com.irurueta.geometry.Point2D>

This is an abstract class to robustly estimate 2D position, transmitted power and path-loss exponent of a radio source (e.g. Wi-Fi access point or bluetooth beacon), by discarding outliers and assuming that the radio source emits isotropically following the expression below: Pr = Pt*Gt*Gr*lambda^2 / (4*pi*d)^2, where Pr is the received power (expressed in mW), Gt is the Gain of the transmission antenna Gr is the Gain of the receiver antenna d is the distance between emitter and receiver and lambda is the wavelength and is equal to: lambda = c / f, where c is the speed of light and f is the carrier frequency of the radio signal. Because usually information about the antenna of the radio source cannot be retrieved (because many measurements are made on unknown devices where physical access is not possible), this implementation will estimate the equivalent transmitted power as: Pte = Pt * Gt * Gr. If RssiReadings contain RSSI standard deviations, those values will be used, otherwise it will be assumed an RSSI standard deviation of 1 dB. Implementations of this class should be able to detect and discard outliers in order to find the best solution.

IMPORTANT: Implementations of this class can choose to estimate a combination of radio source position, transmitted power and path loss exponent. However enabling all three estimations usually achieves inaccurate results. When using this class, estimation must be of at least one parameter (position, transmitted power or path loss exponent) when initial values are provided for the other two, and at most it should consist of two parameters (either position and transmitted power, position and path loss exponent or transmitted power and path loss exponent), providing an initial value for the remaining parameter.

Nested Class Summary

Nested classes/interfaces inherited from class com.irurueta.navigation.indoor.radiosource.RobustRssiRadioSourceEstimator

RobustRssiRadioSourceEstimator.Solution<P extends com.irurueta.geometry.Point<?>>

Field Summary

Fields

Modifier and Type	Field	Description
protected final RssiRadioSourceEstimator2D<S>	innerEstimator	Radio source estimator used internally.
private final List<RssiReadingLocated<S,com.irurueta.geometry.Point2D>>	innerReadings	Subset of readings used by inner estimator.

Fields inherited from class com.irurueta.navigation.indoor.radiosource.RobustRssiRadioSourceEstimator

estimatedPathLossExponent, estimatedPathLossExponentVariance, estimatedTransmittedPowerdBm, estimatedTransmittedPowerVariance, initialPathLossExponent, initialPosition, initialTransmittedPowerdBm, pathLossEstimationEnabled, positionEstimationEnabled, transmittedPowerEstimationEnabled

Fields inherited from class com.irurueta.navigation.indoor.radiosource.RobustRadioSourceEstimator

confidence, covariance, DEFAULT_CONFIDENCE, DEFAULT_KEEP_COVARIANCE, DEFAULT_MAX_ITERATIONS, DEFAULT_PROGRESS_DELTA, DEFAULT_REFINE_RESULT, DEFAULT_ROBUST_METHOD, estimatedPosition, estimatedPositionCovariance, inliersData, keepCovariance, listener, locked, MAX_CONFIDENCE, MAX_PROGRESS_DELTA, maxIterations, MIN_CONFIDENCE, MIN_ITERATIONS, MIN_PROGRESS_DELTA, preliminarySubsetSize, progressDelta, readings, refineResult

Constructor Summary

Constructors

Modifier	Constructor	Description
protected	RobustRssiRadioSourceEstimator2D()	Constructor.
protected	RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(Double initialTransmittedPowerdBm)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm)	Constructor.
protected	RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Constructor.

Method Summary

Modifier and Type	Method	Description
protected void	attemptRefine(RobustRssiRadioSourceEstimator.Solution<com.irurueta.geometry.Point2D> result)	Attempts to refine estimated position and transmitted power contained in provided solution if refinement is requested.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create()	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, Double initialTransmittedPowerdBm)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, Double initialTransmittedPowerdBm, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(double[] qualityScores, List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(Double initialTransmittedPowerdBm)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(Double initialTransmittedPowerdBm, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, double initialPathLossExponent, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.geometry.Point2D initialPosition, Double initialTransmittedPowerdBm, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)	Creates a robust 2D position radio source estimator using default method.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm, RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
static <S extends RadioSource> RobustRssiRadioSourceEstimator2D<S>	create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings, Double initialTransmittedPowerdBm, com.irurueta.numerical.robust.RobustEstimatorMethod method)	Creates a robust 2D position radio source estimator.
RadioSourceWithPowerAndLocated<com.irurueta.geometry.Point2D>	getEstimatedRadioSource()	Gets estimated located radio source with estimated transmitted power.
int	getMinReadings()	Gets minimum required number of readings to estimate power, position and path-loss exponent.
int	getNumberOfDimensions()	Gets number of dimensions of position points.
protected void	solvePreliminarySolutions(int[] samplesIndices, List<RobustRssiRadioSourceEstimator.Solution<com.irurueta.geometry.Point2D>> solutions)	Solves preliminary solution for a subset of samples.

Methods inherited from class com.irurueta.navigation.indoor.radiosource.RobustRssiRadioSourceEstimator

getEstimatedPathLossExponent, getEstimatedPathLossExponentVariance, getEstimatedTransmittedPower, getEstimatedTransmittedPowerdBm, getEstimatedTransmittedPowerVariance, getInitialPathLossExponent, getInitialPosition, getInitialTransmittedPower, getInitialTransmittedPowerdBm, getMethod, isPathLossEstimationEnabled, isPositionEstimationEnabled, isReady, isTransmittedPowerEstimationEnabled, residual, setInitialPathLossExponent, setInitialPosition, setInitialTransmittedPower, setInitialTransmittedPowerdBm, setPathLossEstimationEnabled, setPositionEstimationEnabled, setTransmittedPowerEstimationEnabled

Methods inherited from class com.irurueta.navigation.indoor.radiosource.RobustRadioSourceEstimator

areValidReadings, estimate, getConfidence, getCovariance, getEstimatedPosition, getEstimatedPositionCovariance, getInliersData, getListener, getMaxIterations, getPreliminarySubsetSize, getProgressDelta, getQualityScores, getReadings, internalSetReadings, isCovarianceKept, isLocked, isResultRefined, setConfidence, setCovarianceKept, setListener, setMaxIterations, setPreliminarySubsetSize, setProgressDelta, setQualityScores, setReadings, setResultRefined

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Details

innerEstimator

protected final RssiRadioSourceEstimator2D<S extends RadioSource> innerEstimator

Radio source estimator used internally.

innerReadings

private final List<RssiReadingLocated<S extends RadioSource,com.irurueta.geometry.Point2D>> innerReadings

Subset of readings used by inner estimator.

Constructor Details

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D()

Constructor.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings)

Constructor. Sets signal readings belonging to the same radio source.

Parameters:

readings - signal readings belonging to the same radio source.

Throws:

IllegalArgumentException - if readings are not valid.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Constructor.

Parameters:

listener - listener in charge of attending events raised by this instance.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Constructor. Sets signal readings belonging to the same radio source.

Parameters:

readings - signal readings belonging to the same radio source.

listener - listener in charge of attending events raised by this instance.

Throws:

IllegalArgumentException - if readings are not valid.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition)

Constructor. Sets signal readings belonging to the same radio source.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

Throws:

IllegalArgumentException - if readings are not valid.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition)

Constructor.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Constructor.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

listener - listener in charge of attending events raised by this instance.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Constructor. Sets signal readings belonging to the same radio source.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

listener - listener in charge of attending events raised by this instance.

Throws:

IllegalArgumentException - if readings are not valid.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(Double initialTransmittedPowerdBm)

Constructor.

Parameters:

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 Double initialTransmittedPowerdBm)

Constructor. Sets signal readings belonging to the same radio source.

Parameters:

readings - Wi-Fi signal readings belonging to the same radio source.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

Throws:

IllegalArgumentException - if readings are not valid.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Constructor.

Parameters:

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

listener - listener in charge of attending events raised by this instance.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Constructor. Sets signal readings belonging to the same radio source.

Parameters:

readings - Wi-Fi signal readings belonging to the radio source point.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

listener - listener in charge of attending events raised by this instance.

Throws:

IllegalArgumentException - if readings are not valid.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm)

Constructor. Sets signal readings belonging to the same radio source.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

Throws:

IllegalArgumentException - if readings are not valid.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm)

Constructor.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Constructor.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

listener - listener in charge of attending events raised by this instance.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Constructor. Sets signal readings belonging to the same radio source.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

listener - listener in charge of attending events raised by this instance.

Throws:

IllegalArgumentException - if readings are not valid.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent)

Constructor. Sets signal readings belonging to the same radio source.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

Throws:

IllegalArgumentException - if readings are not valid.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent)

Constructor.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Constructor.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

listener - listener in charge of attending events raised by this instance.

RobustRssiRadioSourceEstimator2D

protected RobustRssiRadioSourceEstimator2D(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Constructor. Sets signal readings belonging to the same radio source.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

listener - listener in charge of attending events raised by this instance.

Throws:

IllegalArgumentException - if readings are not valid.

Method Details

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

listener - listener in charge of attending events raised by this instance

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(Double initialTransmittedPowerdBm,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 Double initialTransmittedPowerdBm,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D radio source power and position estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

method - robust estimator method.

Returns:

a new robust 2D radio source power and position estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

listener - listener in charge of attending events raised by this instance

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 Double initialTransmittedPowerdBm,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of access point transmitted power (expressed in dBm's).

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 Double initialTransmittedPowerdBm,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener,
 com.irurueta.numerical.robust.RobustEstimatorMethod method)

Creates a robust 2D position radio source estimator.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

listener - listener in charge of attending events raised by this instance.

method - robust estimator method.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create()

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

listener - listener in charge of attending events raised by this instance

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(Double initialTransmittedPowerdBm)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 Double initialTransmittedPowerdBm)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

listener - listener in charge of attending events raised by this instance

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 Double initialTransmittedPowerdBm)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 Double initialTransmittedPowerdBm)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's)

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

create

public static <S extends RadioSource>
RobustRssiRadioSourceEstimator2D<S> create(double[] qualityScores,
 List<? extends RssiReadingLocated<S,com.irurueta.geometry.Point2D>> readings,
 com.irurueta.geometry.Point2D initialPosition,
 Double initialTransmittedPowerdBm,
 double initialPathLossExponent,
 RobustRssiRadioSourceEstimatorListener<S,com.irurueta.geometry.Point2D> listener)

Creates a robust 2D position radio source estimator using default method.

Type Parameters:

S - a RadioSource type.

Parameters:

qualityScores - quality scores corresponding to each provided sample. The larger the score value the better the quality of the sample.

readings - signal readings belonging to the same radio source.

initialPosition - initial position to start the estimation of radio source position.

initialTransmittedPowerdBm - initial transmitted power to start the estimation of radio source transmitted power (expressed in dBm's).

initialPathLossExponent - initial path loss exponent. A typical value is 2.0.

listener - listener in charge of attending events raised by this instance.

Returns:

a new robust 2D position radio source estimator.

Throws:

IllegalArgumentException - if readings are not valid.

getMinReadings

public int getMinReadings()

Gets minimum required number of readings to estimate power, position and path-loss exponent. This value depends on the number of parameters to be estimated, but for position only, this is 3 readings.

Specified by:

getMinReadings in class RobustRadioSourceEstimator<com.irurueta.geometry.Point2D,RssiReadingLocated<S extends RadioSource,com.irurueta.geometry.Point2D>,RobustRssiRadioSourceEstimatorListener<S extends RadioSource,com.irurueta.geometry.Point2D>>

Returns:

minimum required number of readings.

getNumberOfDimensions

public int getNumberOfDimensions()

Gets number of dimensions of position points.

Specified by:

getNumberOfDimensions in class RobustRadioSourceEstimator<com.irurueta.geometry.Point2D,RssiReadingLocated<S extends RadioSource,com.irurueta.geometry.Point2D>,RobustRssiRadioSourceEstimatorListener<S extends RadioSource,com.irurueta.geometry.Point2D>>

Returns:

always returns 2 dimensions.

getEstimatedRadioSource

public RadioSourceWithPowerAndLocated<com.irurueta.geometry.Point2D> getEstimatedRadioSource()

Gets estimated located radio source with estimated transmitted power.

Specified by:

getEstimatedRadioSource in class RobustRadioSourceEstimator<com.irurueta.geometry.Point2D,RssiReadingLocated<S extends RadioSource,com.irurueta.geometry.Point2D>,RobustRssiRadioSourceEstimatorListener<S extends RadioSource,com.irurueta.geometry.Point2D>>

Returns:

estimated located radio source with estimated transmitted power or null.

solvePreliminarySolutions

protected void solvePreliminarySolutions(int[] samplesIndices,
 List<RobustRssiRadioSourceEstimator.Solution<com.irurueta.geometry.Point2D>> solutions)

Solves preliminary solution for a subset of samples.

Specified by:

solvePreliminarySolutions in class RobustRssiRadioSourceEstimator<S extends RadioSource,com.irurueta.geometry.Point2D>

Parameters:

samplesIndices - indices of subset samples.

solutions - instance where solution will be stored.

attemptRefine

protected void attemptRefine(RobustRssiRadioSourceEstimator.Solution<com.irurueta.geometry.Point2D> result)

Attempts to refine estimated position and transmitted power contained in provided solution if refinement is requested. This method sets a refined result and transmitted power or provided input result if refinement is not requested or has failed. If refinement is enabled, and it is requested to keep covariance, this method will also keep covariance of refined result. solution if not requested or refinement failed.

Parameters:

result - result to be refined.